cases & bags

Showing posts with label shutter. Show all posts
Showing posts with label shutter. Show all posts

Thursday, 23 June 2011

Shooting in Manual Mode

First, you need to select the Manual Mode at the camera Mode Dial. You might found your Dial looks different, but I'm sure you can find the M icon ( In red circle) at the Dial :)


So, what does Manual Mode do? Let's begin. These are the setting for my camera, but it will be about the same as yours as well. Do not worry ^^

Aperture = Selectable
Shutter Speed = Selectable
Exposure = Cannot be Set
ISO Speed = Selectable
Picture Style = Selectable
White Balance = Selectable
AF Mode = Selectable
AF Point Selection = Selectable
Drive Mode = Selectable
Metering Mode = Selectable
Built-in Flash = Selectable

Most of the settings are selectable in Manual Mode, it is about the SAME as Program AE Mode.  I would say there is no more honeymoon for user who choose this Mode. There are many things to aware and you need to try different setting in different situation, Manually :)

The Shutter Speed and Aperture are selectable. Therefore, the Exposure will indicate the result according to your Shutter Speed and Aperture setting. Do you remember the chapter "How does Exposure work"? Let's see the steps below. 

1) Set your desire Shutter Speed
- Depends on what you want to shoot and style you want to create in your picture. Blur or Freeze motion. Please refer to chapter "Shooting in Shutter-Priority Mode".

2) Set your desire f-number. Do you still remember the chapter "Controlling the Depth of Field" ? I think I should repeat it again, simple one.

- If you higher the f-number, the Depth of Field will be wider. Therefore, both in front and back of the subject will be focus. 

- If you lower the f-number, the Depth of Field will be narrower. Therefore, only the subject is sharp and clear, most photographers like to create a soft background for portraits.

3) Set your desire ISO Speeds.
-If you found you can't get a satisfy result because of the dark environment, set the ISO speeds higher in order to increase the Shutter Speed to freeze the motion.

4) Pay attention in your Exposure
- As I mentioned above, the Shutter Speed and Aperture are under your control. Therefore, the camera will indicate whether you have a correct Exposure. 


If you are underexposure or overexposure, the Exposure bar will blink (in Green Circle). Therefore, you can create your own style, dark or bright, blur or freeze, it all depends on the user now. 

- You are advised to skip directly to Step 11 because the AF Point, AF Mode, Metering Mode, Drive Mode, White Balance, Picture Style and Built-in Flash are about the Same as Exposure-Priority Mode.

5) Set your desire AF Point.
- You can select your desire AF Point in this Mode. Unlike Auto Mode, Portrait Mode, Landscape Mode and etc, you can now choose the point you want to be focused. The Red Square shows the selected AF Point.


6) Try to focus with Manual Focus.
- I strongly recommend the user who choose Aperture-Priority Mode use Manual Focus. All you need to do is push the button from AF to MF.


Well, although Auto Focus is very convenient in most of the time, you need to try Manual Focus in order to improve your skill. Also, Manual Focus save more battery than Auto Focus. If you do not have a Battery Grip ( I only use it when I attach the External Flash ), you can use Manual Focus so your battery can last for the whole day.

7) Set the AF Mode.
- I'm sorry to tell you that you are not allowed to use AF Mode if you are using Manual Focus. It is because once you selected Manual Focus, all the AF Mode selection will not works. Switch back to Auto Focus to capture moving objects. :)

8) Try different Drive Mode for continuous action.
- There are 5 different Drive Mode for my camera, which are Single, Low-Speed continuous Shutter, High-Speed Continuous Shutter, 2 seconds Timer and 10 seconds Timer.

The first thing you need to aware is light source. If the environment is too dark, you can forget about the Continuous Shutter because you will not get a sharp and clear picture. Please refer back to chapter "How to Freeze Motion?".

9) Set your desire Metering Mode.
- Please refer back to chapter "How does Metering Mode work?"

10) Set your desire Drive Mode
- Please refer back to chapter "How does Drive Mode work?"

11) Manual Mode in dark environment
- Most photographer use Manual Mode in dark environment which difficult to get Exposure. Since Shutter Speed is under your control, you can even shoot starlit sky now. 

Although Shutter-Priority Mode can select your desire Shutter Speed ( or even open with BULK whole night for starlit sky), but you can't control the f-number. Therefore, you might not get the result you want. What you see with your eyes is different with the camera at night. 

You might feel difficult at first because you do not know the Exposure level. But you can look at the Exposure level indicator in the LCD Panel or viewfinder. Once the Exposure reach your desire level, close the shutter immediately before it overexpose. 


Tuesday, 14 June 2011

Shooting in Program AE Mode.

First, you need to select the Program AE Mode at the camera Mode Dial. You might found your Dial looks different, but I'm sure you can find the P icon ( In red circle) at the Dial :)


So, what does Program AE (Or I called it as Exposure-Priority) Mode do? Let's begin. These are the setting for my camera, but it will be about the same as yours as well. Do not worry ^^

Aperture = Program Shift
Shutter Speed = Program Shift
Exposure = Selectable
ISO Speed = Selectable
Picture Style = Selectable
White Balance = Selectable
AF Mode = Selectable
AF Point Selection = Selectable
Drive Mode = Selectable
Metering Mode = Selectable
Built-in Flash = Selectable

Most of the settings are selectable in Program AE Mode, it is about the SAME as Shutter-Priority Mode.  I would say there is no more honeymoon for user who choose this Mode. There are many things to aware and you need to try different setting in different situation, Manually :)

The Aperture and Shutter Speed are in Program Shift, or should called it Auto. Therefore, you need to pay attention to the Exposure and ISO Speeds for a normal shooting, just ignore the white balance, drive mode and etc at the beginning. Program AE Mode is like Auto Mode, but you are allowed to control AF Mode, Metering, White Balance and etc, as shown as above.  I will show it step by step, in simple way.

1) Set your desire Exposure.
- The Shutter Speed and Aperture will automatically shift in order to get the Exposure you want. It is suitable for most shooting. 

2) Set your desire ISO Speeds.
-If you found you can't get a satisfy result because of the dark environment, a higher ISO speeds will give a wider option for the camera to adjust and get a balance setting for both Shutter Speed and Aperture. 

3) Set your desire AF Point.
- You can select your desire AF Point in this Mode. Unlike Auto Mode, Portrait Mode, Landscape Mode and etc, you can now choose the point you want to be focused. The Red Square shows the selected AF Point.


4) Try to focus with Manual Focus.
- I strongly recommend the user who choose Shutter-Priority Mode use Manual Focus. All you need to do is push the button from AF to MF.


Well, although Auto Focus is very convenient in most of the time, you need to try Manual Focus in order to improve your skill. Also, Manual Focus save more battery than Auto Focus. If you do not have a Battery Grip ( I only use it when I attach the External Flash ), you can use Manual Focus so your battery can last for the whole day.

5) Set the AF Mode.
- I'm sorry to tell you that you are not allowed to use AF Mode if you are using Manual Focus. It is because once you selected Manual Focus, all the AF Mode selection will not works. Switch back to Auto Focus to capture moving objects. :)

6) Try different Drive Mode for continuous action.
- There are 5 different Drive Mode for my camera, which are Single, Low-Speed continuous Shutter, High-Speed Continuous Shutter, 2 seconds Timer and 10 seconds Timer.

The first thing you need to aware is light source. If the environment is too dark, you can forget about the Continuous Shutter because you will not get a sharp and clear picture. Please refer back to chapter "How to Freeze Motion?".

7) Set your desire White Balance and Picture Style.
- Please refer back to chapter "How does White Balance work?" and "How does Picture Style work?"

8) Set your desire Metering Mode.
- Please refer back to chapter "How does Metering Mode work?"

9) Set your desire Drive Mode
- Please refer back to chapter "How does Drive Mode work?"

10) Freeze motion and Depth of Field
- In Program AE Mode, you are allowed to select a higher or lower f-number for Certain Model of camera. The Shutter will shift to the proper speed in order to get your desire Exposure as well.  But of course, the results might not as good as Shutter-Priority Mode and Aperture-Priority Mode.

Actually, Program AE Mode is the gentle start for users who want to manually control the camera settings. You will see the differences when you move on to further chapters.


Do you want to know more? Please "like" my posts ^^

Sunday, 12 June 2011

How does Metering Mode work?

Metering Mode is a setting to measure the brightness entered the camera in order to get the correct Exposure. Most camera setting Metering Mode in Evaluative metering by default. Therefore, you will see the symbol like an eye, which shown in the green circle. 


There are four Metering Mode, each of them has different area in detecting the brightness. Most photography lesson demonstrate back light shooting in this topic, but I got something different for today's lesson. :)

1) Evaluative Metering
- This is a standard mode which suitable to most scenes. It is an all-around metering mode, the camera will sets the exposure automatically to suit most scenes such as portrait and backlit subject.



2) Centerweighted Average Metering
- The Metering is concentrated at the center and averaged with the rest of the scene. It will gain more details at the background but the front subject will get darker in back light shooting. Centerweighted Average metering got darker picture compare with Evaluative metering.



3) Partial Metering
- This mode is more suitable for scenes where there are very bright and very dark scenes. The metering is in a small target which cover about 9% of the center of the viewfinder. It is more suitable for back lighting subject. Brightness of both subject and background will be balanced in this Metering Mode, the details of background are lesser compare with Evaluative Mode.



4) Spot Metering
- Spot Metering is available in Mid level and Professional level cameras. It has a smaller metering area compare with Partial Metering, which is about 3.8% of the center of the viewfinder. It looks like Prime's head  to me ^^.



In these cloud photos, you can see Spot Metering got the most details of the cloud and darkest of all. It is because your camera do not exposure instantly, therefore, more details will be captured. You might think, why don't you just decrease the Exposure to get a darker picture if darker one can get the more details? Well, it worth a shot but you probably will not get what you want. :)

Please be aware that Exposure and Metering are different setting, but these setting will affect each other. If you decrease the Exposure, you will get a darker version ONLY, you do not gain details for that. But Metering Mode is the Area you want your camera to concentrate.

Do you remember the chapter "How does Exposure work"? Exposure obtained when the Shutter open. If you shoot the backlit subject or sky, your camera will capture the "bright" thing first. The Exposure is still CORRECT because you do not specify the light area you want your camera to concentrate. Do not get me wrong, Area to concentrate does not same as Focus. Therefore, if the background is too bright, your camera will capture the background instead of the subject. 


Do you want to know more? Please "like" my posts ^^

Sunday, 15 May 2011

How to Use Auto Mode?

First, you need to select the Auto Mode at the camera Mode Dial. You might found your Dial looks different, but I'm sure you can find the Green Square icon ( In red circle) at the Dial :)



So, what does Auto Mode do? Let's begin. These are the setting for my camera, but it will be about the same as yours as well. Do not worry ^^

Aperture = Auto
Shutter Speed = Auto
Exposure = Not Available
ISO Speed = Auto
Picture Style = Standard
White Balance = Auto
AF Mode = AI Focus
AF Point Selection = Auto
Drive Mode = Single
Metering Mode = Evaluative
Built-in Flash = Auto

Auto Mode is a convenient mode for most user. According to difference environment, Aperture, Shutter Speed, ISO speeds and White Balance are all decided by the camera. Also, it is suitable for a shooting a moving object because of the autofocus. Built-in flash will pop up it the environment insufficient in light.


There is no user setting at all so anyone can take a picture, most suitable for newbie or people who help you to take photos.


Do you want to know more? Please "like" my posts ^^


Check out more DSLR and Gadgets?


Tuesday, 10 May 2011

How to Freeze motion?

Capture a clear and memorable photo is very important, whether you are a professional photographer or not. But most of the time, due to the environment, maybe in car racing, horse racing, 100 meters dash, or your kids are running, you might feel very difficult to get a sharp and clear photo. 

The main reason you cannot capture a moving object is because the Shutter speed not fast enough. You might tried faster Shutter speed but you got a same blur result. 

Let's back to the basic of camera then. :)

Do you remember "How does Camera work" ? Film and Sensor need to capture light in order to get enough Exposure. Therefore, increasing the Shutter speed does not really solve the problem. You need another thing to help you increase the Exposure, it called "Light" :)

How do you get Light? Well, Camera Flash, Fluorescent light, Sun light and etc. Or you can increase your ISO speeds as well. Why?



This picture was captured at outdoor with 1/100 sec Shutter speed. As you can see, 1/100 sec Shutter speed is not enough to freeze the motion of the fish. You can see the water splashing but it is not clear and the surface of water is not sharp as well.



This picture was captured in 1/250 sec Shutter speed. The surface of the water looks clearer compare to 1/100 sec Shutter speed. Also, you can see the fish head, sharp enough isn't it?



As long as the you get enough Exposure, you can try a faster Shutter speed. This picture was captured in 1/1250 sec Shutter speed. 


Friday, 6 May 2011

How does Shutter work?

What is a Shutter? Shutter is a device, too... ...that's all? Lame joke... ...Let's get serious :)

Shutter is a gate that block light goes in the camera, so your Sensor (for digital camera) or film (for film camera) will not get expose. Remember the Black Box mentioned in "How does Camera work" ? Shutter is actually the "cover" mentioned in the chapter and it decide whether the picture is clear or blur. Why?

Imagine the Shutter is you eyelid, and it is close by now. You see nothing...of course ^^. Now open your eye and close it quickly. What did you see? Well, depends on how fast your eyelid can open and close. So, if you open for just 0.1 second, you only able to capture the image for 0.1 second as well. 

Therefore, faster Shutter speed can Freezes the motion and you can capture a clearer picture.



And for a slower Shutter speed, you will capture something blur.



However, due to the faster Shutter speed, your camera does not have enough time to capture enough light, which we called "Exposure". You will get a darker picture as well. 


Most cameras have 1 sec, 1/2 sec, 1/4 sec, 1/8 sec, 1/15 sec, 1/30 sec and 1/60 sec Shutter speeds. For higher entry level  SLR, 1/8000 sec Shutter speeds is available. 



This is a flame capture in 1/8000 sec, no PhotoShop or relevant software modified. I swear :)


Do you want to know more? Please "like" my posts ^^